✓1. PO-PENDING FOR PREPARATION DETAILS
✓2. UNDER CHECKING DLOA/PO
✓4. TOTAL PO PENDING DETAILS-
✓5. MATERIAL CODE PENDING BY GAIL
ASTM-MATERIAL DETAILS
| SL NO | |||
|---|---|---|---|
| 1 | IS-3589, IS-3589 GR.410 | MILD STEEL, IS-3589, IS-3589-GR.410 | Pipe |
| 1 | ASTM A105 | CARBON STEEL, ASTM-A105 | Pipe, Fitting |
| 2 | ASTM A 105 | CARBON STEEL, ASTM-A105 | Pipe, Fitting |
| 3 | ASTM A 106 GR.B | CARBON STEEL, ASTM-A106 GR.B | Pipe, Fitting |
| 4 | ASTM A 182 GR.F304 | STAINLESS STEEL, ASTM-A182 GR.F304 | Pipe, Fitting |
| 5 | ASTM A182 GR.F304/304L | STAINLESS STEEL, ASTM-A182 GR.F304/304L | Pipe, Fitting |
| 6 | ASTM A 182 GR.F316 | STAINLESS STEEL, ASTM-A182 GR.F316 | |
| 7 | ASTM A 182 GR.F321H | STAINLESS STEEL, ASTM-A182 GR.F321H | |
| 8 | ASTM A182 GR F304 | STAINLESS STEEL, ASTM-A182 GR F304 | |
| 9 | ASTM A 182 GR.F11 CL.2 | ALLOY STEEL, ASTM-A182 GR.F11 CL.2 | |
| 10 | ASTM A216 GR WCB | CARBON STEEL, ASTM-A216 GR WCB | |
| 11 | ASTM A216 GR.WCB | CARBON STEEL, ASTM-A216 GR.WCB | |
| 12 | ASTM A 216 GR.WCB | CARBON STEEL, ASTM-A216 GR.WCB | |
| 13 | ASTM A217 GR WC6 | ALLOY STEEL, ASTM-A217 GR WC6 | |
| 14 | ASTM A 217 GR.WC6 | ALLOY STEEL, ASTM-A217 GR WC6 | |
| 15 | ASTM A 217 GR.W C6 | ALLOY STEEL, ASTM-A217 GR.W C6 | |
| 16 | ASTM A 234 GR.WP11 CL.1 | ALLOY STEEL, ASTM-A234 GR.WP11 CL.1, WP5, WP9, WP22, WP91 | |
| 17 | A 234 GR.WPB (EPOXY COATED) | CARBON STEEL, ASTM-A234 GR.WPB (EPOXY COATED) | Fitting |
| 18 | A 234 GR.WPB-W (EPOXY COATED) | CARBON STEEL, ASTM-A234 GR.WPB-W (EPOXY COATED) | Fitting |
| 19 | ASTM A 234 GR.WPB | CARBON STEEL, ASTM-A234 GR.WPB | Fitting |
| 20 | ASTM A 234 GR.WPB-W | CARBON STEEL, ASTM A 234 GR.WPB-W | Fitting |
| 21 | ASTM A 312 TP304 | STAINLESS STEEL, ASTM-A312 TP304 | |
| 22 | ASTM A 312 TP316 | STAINLESS STEEL, ASTM-A312 TP316 | |
| 23 | ASTM A 312 TP321H | STAINLESS STEEL, ASTM-A312 TP321H | |
| 24 | ASTM A312 GR.TP304/304L | STAINLESS STEEL, ASTM-A312 GR.TP304/304L | |
| 25 | ASTM A 333 GR.6 | LOW-TEMPERATURE CARBON STEEL, ASTM-A333 GR.6 | Fitting |
| 26 | ASTM A 335 GR.P11 | ALLOY-STEEL, ASTM-A335 GR.P11 | |
| 27 | ASTM A 350 GR.LF2 CL.1 | LOW-TEMPERATURE CARBON STEEL, ASTM-A350 GR.LF2 CL.1 | Fitting |
| 28 | ASTM A 350 GR.LF2 CL. 1 | LOW-TEMPERATURE CARBON STEEL, ASTM-A350 GR.LF2 CL.1 | Fitting |
| 29 | ASTM A350 GR LF2 CL1 | LOW-TEMPERATURE CARBON STEEL, ASTM-A350 GR LF2 CL1 | Fitting |
| 30 | ASTM A 351 GR. CF8 | STAINLESS STEEL, ASTM-A351 GR. CF8 | |
| 31 | ASTM A 351 GR CF8 | STAINLESS STEEL, ASTM-A351 GR CF8 | |
| 32 | ASTM A 351 GR.CF8 | STAINLESS STEEL, ASTM-A351 GR.CF8 | |
| 33 | ASTM A351 GR. CF8C | STAINLESS STEEL, ASTM-A351 GR. CF8C | |
| 34 | ASTM A 351 GR.CF8M | STAINLESS STEEL, ASTM-A351 GR.CF8 | |
| 35 | ASTM A 352 GR.LCB | LOW-TEMPERATURE CARBON STEEL, ASTM-A352 GR.LCB | |
| 36 | ASTM A352 GR LCB | LOW-TEMPERATURE CARBON STEEL, ASTM-A352 GR LCB | |
| 37 | ASTM A 358 TP304 CL.1 | STAINLESS STEEL, ASTM-A358 TP304 CL.1 | |
| 38 | ASTM A 403 GR.WP304-S | STAINLESS STEEL, ASTM-A403 GR.WP304-S | |
| 39 | ASTM A 403 GR.WP304-WX | STAINLESS STEEL, ASTM-A403 GR.WP304-WX | |
| 40 | ASTM A 403 GR.WP316-S | STAINLESS STEEL, ASTM-A403 GR.WP316-S | |
| 41 | ASTM A 403 GR.WP321H-S | STAINLESS STEEL, ASTM-A403 GR.WP321H-S | |
| 42 | ASTM A403 GR.WP304/304L-S | STAINLESS STEEL, ASTM-A403 GR.WP304/304L-S | |
| 43 | ASTM A 420 GR.WPL6 | ALLOY STEEL, ASTM-A420 GR.WPL6 | Fitting |
| 44 | ASTM A 516 GR.70 | CARBON STEEL, ASTM-A516 GR.70 | |
| 45 | ASTM A 671 GR.CC60 CL.32 | LOW-TEMPERATURE CARBON STEEL, ASTM-A671 GR.CC60 CL.32 | |
| 46 | A672GR.B60 CL.12 | CARBON STEEL, ASTM-A672 GR.B60 CL.12 | |
| 47 | ASTM A 672 GR.B60 CL.12 | CARBON STEEL, ASTM-A672 GR.B60 CL.12 | |
| 48 | ASTM A 691 GR.1.25CR CL.42 | ALLOY-STEEL, ASTM-A691 GR.1.25CR CL.42 | |
| 49 | A106 Grade B | Carbon steel Type 235 1) | Pipes Seamless |
| 50 | API 5L Grade B, ASTM A672, CC60, CC70, Class 12, 22 | Carbon steel Type 235 1) | Pipes Welded |
| 51 | A234 Grade, , WPB | Carbon steel Type 235 1) | Fittings |
| 52 | A105 | Carbon steel Type 235 1) | Forgings |
| 53 | A516 Grade 60,, 70 | Carbon steel Type 235 1) | Plate |
| 54 | A216 Grade, , WCB, | Carbon steel Type 235 1) | Castings |
| 55 | A333 Grade 6 | Carbon steel Type 235LT impact tested | Pipes Seamless |
| 56 | A671 GRADE CC60, , , , CC70, CLASS 12 ,12 | Carbon steel Type 235LT impact tested | Pipes Welded |
| 57 | A420 GRADE WPL, , 6, | Carbon steel Type 235LT impact tested | Fittings |
| 58 | A350 Grade LF2 | Carbon steel Type 235LT impact tested | Forgings |
| 59 | A352 Grade LCC, | Carbon steel Type 235LT impact tested | Castings |
| 60 | API 5L Grade X52 | Carbon steel Type 360LT impact tested | Pipes Seamless |
| 61 | A671 Grade, CC70, Class 12, 22, | Carbon steel Type 360LT impact tested | Pipes Welded |
| 62 | A860 Grade, WPHY 52 | Carbon steel Type 360LT impact tested | Fittings |
| 63 | A694 Grade, F52, | Carbon steel Type 360LT impact tested | Forgings |
| 64 | A516 Grade 70, | Carbon steel Type 360LT impact tested | Plate |
| 65 | A352 Grade, LCC, | Carbon steel Type 360LT impact tested | Castings |
| 66 | A312 Grade TP 316 | Stainless steel Type 316 | Pipes Seamless |
| 67 | A312 GradeTP316, A358, Grade 316, Class 1, 3, 4, | Stainless steel Type 316 | Pipes Welded |
| 68 | A403 Grade WP316, Class S, W, WX | Stainless steel Type 316 | Fittings |
| 69 | A182 Grade F316, | Stainless steel Type 316 | Forgings |
| 70 | A240 Grade 316, | Stainless steel Type 316 | Plate |
| 71 | A351 GradeCF8M or, CF3M, , | Stainless steel Type 316 | Castings |
| 72 | A276, UNS S 31803, | Stainless steel Type 316 | Bars |
| 73 | A269, 316, , | Stainless steel Type 316 | Tubes |
| 74 | A790 UNS S31803 | Stainless steel Type 22Cr Duplex | Pipes Seamless |
| 75 | A928 UNS, , , , S31803, Class 1, 3, 5 | Stainless steel Type 22Cr Duplex | Pipes Welded |
| 76 | A815 UNS, , S31803, Class S, W, WX | Stainless steel Type 22Cr Duplex | Fittings |
| 77 | A182 Grade F51 | Stainless steel Type 22Cr Duplex | Forgings |
| 78 | A240 UNS, S31803 | Stainless steel Type 22Cr Duplex | Plate |
| 79 | A890 UNS Grade, 4 (J92205) | Stainless steel Type 22Cr Duplex | Castings |
| 80 | A789, UNS S 31803 | Stainless steel Type 22Cr Duplex | Tubes |
| 81 | A790 UNS S32550, UNS S32750, UNS S32760 | Stainless steel Type 25Cr Duplex | Pipes Seamless |
| 82 | A928, , , , UNS S32550,, UNS S32750,, UNS S32760,, Class 1, 3 and 5 | Stainless steel Type 25Cr Duplex | Pipes Welded |
| 83 | A815, , UNS S32550,, UNS S32750,, UNS S32760,, Class S, W,, WX, | Stainless steel Type 25Cr Duplex | Fittings |
| 84 | A182, UNS S32550,, F53 (UNS, S32750),, F55 (UNS, S32760) | Stainless steel Type 25Cr Duplex | Forgings |
| 85 | A240, UNS S32550,, UNS S32750,, UNS S 32760, | Stainless steel Type 25Cr Duplex | Plate |
| 86 | A890, , UNS J93404,, UNS J93380 | Stainless steel Type 25Cr Duplex | Castings |
| 87 | A276, UNS S 32550, UNS S 32750, UNS S 32960 | Stainless steel Type 25Cr Duplex | Bars |
| 88 | A789, UNS S32550, UNS S 32750, UNS S 32760 | Stainless steel Type 25Cr Duplex | Tubes |
| 89 | A312, UNS S31354,, UNS N08367,, UNS N08925,, UNS N08926 | Stainless steel | Pipes Seamless |
| 90 | A358, UNS S31254,, UNS N08367,, UNS N08925,, UNS N08926, Class 1, 3, 5 | Stainless steel | Pipes Welded |
| 91 | A403, WP S31254,, UNS N08367,, UNS N08925,, UNS N08926, Class S, W,, WX | Stainless steel | Fittings |
| 92 | A182 Grade, F44,, UNS N08367,, UNS N08925,, UNS N08926, | Stainless steel | Forgings |
| 93 | A 240, UNS S31254,, UNS N08367,, UNS N08925,, UNS N08926 | Stainless steel | Plate |
| 94 | A276, UNS S 31259, UNS N08367, UNS N08925, UNS N08926 | Stainless steel | Tubes |
| 95 | B466 UNS C, 70600 | Cu/Ni 90/10 | Pipes Seamless |
| 96 | B467 UNS C, 70600 | Cu/Ni 90/10 | Pipes Welded |
| 97 | UNS C, 70600, | Cu/Ni 90/10 | Fittings |
| 98 | UNS C, 70600 | Cu/Ni 90/10 | Forgings |
| 99 | B171 UNS C, 70600 | Cu/Ni 90/10 | Plate |
| 100 | B446, UNS N06625, | Cu/Ni 90/10 | Tubes |
| 101 | B705 UNS, UNS N06625 | Nickel alloy | Pipes Seamless |
| 102 | B705 UNS, UNS N06625 | Nickel alloy | Pipes Welded |
| 103 | B366 UNS, UNS N06625 | Nickel alloy | Fittings |
| 104 | B564 UNS, UNS N06625 | Nickel alloy | Forgings |
| 105 | B443 UNS, UNS N06625 | Nickel alloy | Plate |
| 106 | N06625), , Grade, CX2MW, (UNS N26022) | Nickel alloy | Bars |
| 107 | B861 Gr 2 | Titanium | Pipes Seamless |
| 108 | B862 Gr 2, | Titanium | Pipes Welded |
| 109 | B363 Grade, WPT2 /, WPT2W, | Titanium | Fittings |
| 110 | B381 Grade F2 | Titanium | Forgings |
| 111 | B265 Grade 2 | Titanium | Plate |
| 112 | B348, Gr 2 | Titanium | Tubes |
| 113 | A519 AISI, 4130 | High | Pipes Seamless |
| 114 | A234 AISI, 4130, | High | Fittings |
| 115 | ASTM A 788, AISI 4140, API 6A 60K, (AISI 4130), A182 F22 | High | Forgings |
| 116 | Gr 2B, , (¸46°C), | High | Bars |
| 117 | A105 ASTM | CARBON STEELS | |
| 118 | A182 ASTM GR.F304 | STAINLESS STEEL | |
| 119 | A193 GRADE: B8M | STAINLESS STEEL | Stud Bolt |
| 120 | A193 GRADE-B7 AND B16 | ALLOY STEEL | Stud Bolt |
| 121 | A216 ASTM GR WCB | CARBON STEELS | |
| 122 | A217 ASTM GR.W C6 | ALLOY STEEL | |
| 123 | A307 GRADE: B | CARBON STEEL | Stud Bolt |
| 124 | A312 TP304 | STAINLESS STEEL | |
| 125 | A312 TP316 | STAINLESS STEEL | |
| 126 | A312 TP321H | STAINLESS STEEL | |
| 127 | A320 GRADE-L7 | ALLOY STEEL | Stud Bolt |
| 128 | A320 GRADE: B8 | STAINLESS STEEL | Stud Bolt |
| 129 | A350 ASTM GR.LF2 CL.1 | LOW-TEMPERATURE CARBON STEELS | |
| 130 | A351 ASTM GR.CF8 | STAINLESS STEEL | |
| 131 | A352 ASTM GR.LCB | LOW-TEMPERATURE CARBON STEELS | |
| 132 | A403 GR.WP304-S | STAINLESS STEEL | |
| 133 | A403 GR.WP316-S | STAINLESS STEEL | |
| 134 | A403 GR.WP321H-S | STAINLESS STEEL | |
| 135 | A403 GR.WP304-WX | STAINLESS STEEL | |
| 136 | SA537 CL-1 | CARBON STEEL, SA537 CL-1 | CHANNEL |
| 137 | A53/A53M-02. | PIPE—STEEL, BLACK AND HOT-DIPPED, ZINC-COATED, WELDED, AND SEAMLESS. | |
| 138 | A105/A105M-02. | CARBON STEEL FORGINGS FOR PIPING APPLICATIONS. | |
| 139 | A106-02a. | SEAMLESS CARBON STEEL PIPE FOR HIGH-TEMPERATURE SERVICE. | |
| 140 | A134-96(2001). | PIPE—STEEL, ELECTRIC-FUSION (ARC)- WELDED (SIZES NPS 16 AND OVER). | |
| 141 | A135-01. | ELECTRIC-RESISTANCE-WELDED STEEL PIPE. | |
| 142 | A139-00. | ELECTRIC-FUSION (ARC)-WELDED STEEL PIPE (NPS 4 AND OVER). | |
| 143 | A179/A179M-90a(2001). | SEAMLESS COLD-DRAWN LOW-CARBON STEEL HEAT-EXCHANGER AND CONDENSER TUBES. | |
| 144 | A181/A181M-01. | CARBON STEEL FORGINGS, FOR GENERAL-PURPOSE PIPING. | |
| 145 | A182/A182M-02. | FORGED OR ROLLED ALLOY-STEEL PIPE FLANGES, FORGED FITTINGS, AND VALVES AND PARTS FOR HIGH-TEMPERATURE SERVICE. | |
| 146 | A193/A193M-03. | ALLOY-STEEL AND STAINLESS STEEL BOLTING MATERIALS FOR HIGH-TEMPERATURE SERVICE. | |
| 147 | A194/A194M-03b. | CARBON AND ALLOY STEEL NUTS FOR BOLTS FOR HIGH-PRESSURE OR HIGH-TEMPERATURE SERVICE OR BOTH. | |
| 148 | A210/A210M-02. | SEAMLESS MEDIUM-CARBON STEEL BOILER AND SUPERHEATER TUBES. | |
| 149 | A234/A234M-03. | PIPING FITTINGS OF WROUGHT CARBON STEEL AND ALLOY STEEL FOR MODERATE- AND HIGH-TEMPERATURE SERVICE. | |
| 150 | A268/A268M-03. | SEAMLESS AND WELDED FERRITIC AND MARTENSITIC STAINLESS STEEL TUBING FOR GENERAL SERVICE. | |
| 151 | A269-02a. | SEAMLESS AND WELDED AUSTENITIC STAINLESS STEEL TUBING FOR GENERAL SERVICE. | |
| 152 | A312/A312M-03. | SEAMLESS AND WELDED AUSTENITIC STAINLESS STEEL PIPES. | |
| 153 | A320/A320M-03. | ALLOY-STEEL BOLTING MATERIALS FOR LOW-TEMPERATURE SERVICE. | |
| 154 | A333/A333M-99. | SEAMLESS AND WELDED STEEL PIPE FOR LOW-TEMPERATURE SERVICE. | |
| 155 | A334/A334M-99. | SEAMLESS AND WELDED CARBON AND ALLOY-STEEL TUBES FOR LOW-TEMPERATURE SERVICE. | |
| 156 | A335/A335M-03. | SEAMLESS FERRITIC ALLOY-STEEL PIPE FOR HIGH-TEMPERATURE SERVICE. | |
| 157 | A350/A350M-02b. | CARBON AND LOW-ALLOY STEEL FORGINGS, REQUIRING NOTCH TOUGHNESS TESTING FOR PIPING COMPONENTS. | |
| 158 | A358/A358M-01. | ELECTRIC-FUSION-WELDED AUSTENITIC CHROMIUM-NICKEL ALLOY STEEL PIPE FOR HIGH-TEMPERATURE SERVICE. | |
| 159 | A369/A369M-02. | CARBON AND FERRITIC ALLOY STEEL FORGED AND BORED PIPE FOR HIGH-TEMPERATURE SERVICE. | |
| 160 | A376/A376M-02a. | SEAMLESS AUSTENITIC STEEL PIPE FOR HIGH-TEMPERATURE CENTRAL-STATION SERVICE. | |
| 161 | A381-96(2001). | METAL-ARC-WELDED STEEL PIPE FOR USE WITH HIGH-PRESSURE TRANSMISSION SYSTEMS. | |
| 162 | A403/A403M-03a. | WROUGHT AUSTENITIC STAINLESS STEEL PIPING FITTINGS. | |
| 163 | A409/A409M-01. | WELDED LARGE-DIAMETER AUSTENITIC STEEL PIPE FOR CORROSIVE OR HIGH-TEMPERATURE SERVICE. | |
| 164 | A420/A420M-02. | PIPING FITTINGS OF WROUGHT CARBON STEEL AND ALLOY STEEL FOR LOW-TEMPERATURE SERVICE. | |
| 165 | A437/A437M-01a. | ALLOY-STEEL TURBINE-TYPE BOLTING MATERIAL SPECIALLY HEAT TREATED FOR HIGH-TEMPERATURE SERVICE. | |
| 166 | A453/A453M-02. | HIGH-TEMPERATURE BOLTING MATERIALS, WITH EXPANSION COEFFICIENTS COMPARABLE TO AUSTENITIC STAINLESS STEELS. | |
| 167 | A524-96(2001). | SEAMLESS CARBON STEEL PIPE FOR ATMOSPHERIC AND LOWER TEMPERATURES. | |
| 168 | A530/A530M-03. | GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE. | |
| 169 | A587-96(2001). | ELECTRIC-RESISTANCE-WELDED LOWCARBON STEEL PIPE FOR THE CHEMICAL INDUSTRY. | |
| 170 | A671-96(2001). | ELECTRIC-FUSION-WELDED STEEL PIPE FOR ATMOSPHERIC AND LOWER TEMPERATURES. | |
| 171 | A672-96(2001). | ELECTRIC-FUSION-WELDED STEEL PIPE FOR HIGH-PRESSURE SERVICE AT MODERATE TEMPERATURES. | |
| 172 | A691-98(2002). | CARBON AND ALLOY STEEL PIPE, ELECTRIC-FUSION-WELDED FOR HIGH-PRESSURE SERVICE AT HIGH TEMPERATURES. | |
| 173 | A789/A789M-02a. | SEAMLESS AND WELDED FERRITIC/AUSTENITIC STAINLESS STEEL TUBING FOR GENERAL SERVICE. | |
| 174 | A790/A790M-03. | SEAMLESS AND WELDED FERRITIC/AUSTENITIC STAINLESS STEEL PIPE. | |
| 175 | A815/A815M-01a. | WROUGHT FERRITIC, FERRITIC/AUSTENITIC, AND MARTENSITIC STAINLESS STEEL PIPING FITTINGS. | |
| 176 | ASTM A1 | Standard Specification for Carbon Steel Tee Rails | |
| 177 | ASTM A2 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types | |
| 178 | ASTM A3 | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) | |
| 179 | ASTM A6/A6M | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling | |
| 180 | ASTM A20/A20M | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | |
| 181 | ASTM A27/A27M | Standard Specification for Steel Castings, Carbon, for General Application | |
| 182 | ASTM A29/A29M | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought | |
| 183 | ASTM A31 | Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels | |
| 184 | ASTM A34/A34M | Standard Practice for Sampling and Procurement Testing of Magnetic Materials | |
| 185 | ASTM A36/A36M | Standard Specification for Carbon Structural Steel | |
| 186 | ASTM A47/A47M | Standard Specification for Ferritic Malleable Iron Castings | |
| 187 | ASTM A48/A48M | Standard Specification for Gray Iron Castings | |
| 188 | ASTM A49 | Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars | |
| 189 | ASTM A53/A53M | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | |
| 190 | ASTM A65 | Standard Specification for Steel Track Spikes | |
| 191 | ASTM A66 | Standard Specification for Steel Screw Spikes | |
| 192 | ASTM A67 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked | |
| 193 | ASTM A74 | Standard Specification for Cast Iron Soil Pipe and Fittings | |
| 194 | ASTM A90/A90M | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings | |
| 195 | ASTM A99 | Standard Specification for Ferromanganese | |
| 196 | ASTM A100 | Standard Specification for Ferrosilicon | |
| 197 | ASTM A101 | Standard Specification for Ferrochromium | |
| 198 | ASTM A102 | Standard Specification for Ferrovanadium | |
| 199 | ASTM A105/A105M | Standard Specification for Carbon Steel Forgings for Piping Applications | |
| 200 | ASTM A106/A106M | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | |
| 201 | ASTM A108 | Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished | |
| 202 | ASTM A109/A109M | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled | |
| 203 | ASTM A111 | Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire | |
| 204 | ASTM A116 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric | |
| 205 | ASTM A121 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire | |
| 206 | ASTM A123/A123M | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products | |
| 207 | ASTM A125 | Standard Specification for Steel Springs, Helical, Heat-Treated | |
| 208 | ASTM A126 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | |
| 209 | ASTM A128/A128M | Standard Specification for Steel Castings, Austenitic Manganese | |
| 210 | ASTM A131/A131M | Standard Specification for Structural Steel for Ships | |
| 211 | ASTM A132 | Standard Specification for Ferromolybdenum | |
| 212 | ASTM A134 | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) | |
| 213 | ASTM A135/A135M | Standard Specification for Electric-Resistance-Welded Steel Pipe | |
| 214 | ASTM A139/A139M | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) | |
| 215 | ASTM A143/A143M | Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement | |
| 216 | ASTM A144 | Standard Specification for Ferrotungsten | |
| 217 | ASTM A146 | Standard Specification for Molybdenum Oxide Products | |
| 218 | ASTM A148/A148M | Standard Specification for Steel Castings, High Strength, for Structural Purposes | |
| 219 | ASTM A153/A153M | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | |
| 220 | ASTM A159 | Standard Specification for Automotive Gray Iron Castings | |
| 221 | ASTM A167 | Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip.Note:-(Withdrawn 2014, no replacement) | |
| 222 | ASTM A178/A178M | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | |
| 223 | ASTM A179/A179M | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | |
| 224 | ASTM A181/A181M | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping | |
| 225 | ASTM A182/A182M | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | |
| 226 | ASTM A183 | Standard Specification for Carbon Steel Track Bolts and Nuts | |
| 227 | ASTM A184/A184M | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement | |
| 228 | ASTM A192/A192M | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | |
| 229 | ASTM A193/A193M | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications. Note:-Grade B7 Studs bolts and Grade B16 Studs bolts fall in this category and are used for high temperature, high-pressure environments like petroleum industry | |
| 230 | ASTM A194/A194M | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | |
| 231 | ASTM A197/A197M | Standard Specification for Cupola Malleable Iron | |
| 232 | ASTM A203/A203M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | |
| 233 | ASTM A204/A204M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum | |
| 234 | ASTM A209/A209M | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes | |
| 235 | ASTM A210/A210M | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes | |
| 236 | ASTM A213/A213M | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | |
| 237 | ASTM A214/A214M | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes | |
| 238 | ASTM A216/A216M | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | |
| 239 | ASTM A217/A217M | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service | |
| 240 | ASTM A220/A220M | Standard Specification for Pearlitic Malleable Iron | |
| 241 | ASTM A225/A225M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel | |
| 242 | ASTM A227/A227M | Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs | |
| 243 | ASTM A228/A228M | Standard Specification for Steel Wire, Music Spring Quality | |
| 244 | ASTM A230/A230M | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality | |
| 245 | ASTM A231/A231M | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire | |
| 246 | ASTM A232/A232M | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire | |
| 247 | ASTM A234/A234 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service | |
| 248 | ASTM A239 | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles, | |
| 249 | ASTM A240/A240M | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | |
| 250 | ASTM A242/A242M | Standard Specification for High-Strength Low-Alloy Structural Steel | |
| 251 | ASTM A247 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings | |
| 252 | ASTM A249/A249M | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | |
| 253 | ASTM A250/A250M | Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes | |
| 254 | ASTM A252 | Standard Specification for Welded and Seamless Steel Pipe Piles | |
| 255 | ASTM A254/A254M | Standard Specification for Copper-Brazed Steel Tubing | |
| 256 | ASTM A255 | Standard Test Methods for Determining Hardenability of Steel. Note:-Includes the Jominy test and a method based on work by M. A. Grossman (the Grossman method). | |
| 257 | ASTM A262 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | |
| 258 | ASTM A263 | Standard Specification for Stainless Chromium Steel-Clad Plate | |
| 259 | ASTM A264 | Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate | |
| 260 | ASTM A265 | Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate | |
| 261 | ASTM A266/A266M | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | |
| 262 | ASTM A268/A268M | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | |
| 263 | ASTM A269/A269M | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service | |
| 264 | ASTM A270/A270M | Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing | |
| 265 | ASTM A275/A275M | Standard Practice for Magnetic Particle Examination of Steel Forgings | |
| 266 | ASTM A276/A276M | Standard Specification for Stainless Steel Bars and Shapes | |
| 267 | ASTM A278/A278M | Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C) | |
| 268 | ASTM A283/A283M | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates | |
| 269 | ASTM A285/A285M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | |
| 270 | ASTM A288 | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators | |
| 271 | ASTM A289/A289M | Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators | |
| 272 | ASTM A290/A290M | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears | |
| 273 | ASTM A291/A291M | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears | |
| 274 | ASTM A295/A295M | Standard Specification for High-Carbon Anti-Friction Bearing Steel | |
| 275 | ASTM A297/A297M | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application | |
| 276 | ASTM A299/A299M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon | |
| 277 | ASTM A302/A302M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | |
| 278 | ASTM A304 | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements | |
| 279 | ASTM A307 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength | |
| 280 | ASTM A311/A311M | Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements | |
| 281 | ASTM A312/A312M | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | |
| 282 | ASTM A313/A313M | Standard Specification for Stainless Steel Spring Wire | |
| 283 | ASTM A314 | Standard Specification for Stainless Steel Billets and Bars for Forging | |
| 284 | ASTM A319 | Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts | |
| 285 | ASTM A320/A320M | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service | |
| 286 | ASTM A322 | Standard Specification for Steel Bars, Alloy, Standard Grades | |
| 287 | ASTM A323 | Standard Specification for Ferroboron | |
| 288 | ASTM A324 | Standard Specification for Ferrotitanium | |
| 289 | ASTM A325/A325M | Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength.Note:-(Withdrawn 2016, replaced by F3125/F3125M) | |
| 290 | ASTM A327/A327M | Standard Test Methods for Impact Testing of Cast Irons | |
| 291 | ASTM A328/A328M | Standard Specification for Steel Sheet Piling | |
| 292 | ASTM A333/A333M | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness | |
| 293 | ASTM A334/A334M | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | |
| 294 | ASTM A335/A335M | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service | |
| 295 | ASTM A336/A336M | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts | |
| 296 | ASTM A338 | Standard Specification for Malleable Iron Flanges, Jeff, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650 °F (345 °C) | |
| 297 | ASTM A340 | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing | |
| 298 | ASTM A341/A341M | Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods | |
| 299 | ASTM A342/A342M | Standard Test Methods for Permeability of Weakly Magnetic Materials | |
| 300 | ASTM A343/A343M | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame | |
| 301 | ASTM A345 | Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications | |
| 302 | ASTM A348/A348M | Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame | |
| 303 | ASTM A350/A350M | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | |
| 304 | ASTM A351/A351M | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts | |
| 305 | ASTM A352/A352M | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service | |
| 306 | ASTM A353/A353M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel | |
| 307 | ASTM A354 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners | |
| 308 | ASTM A355 | Standard Specification for Steel Bars, Alloys, for Nitriding | |
| 309 | ASTM A356/A356M | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines | |
| 310 | ASTM A358/A358M | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications | |
| 311 | ASTM A363 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand | |
| 312 | ASTM A367 | Standard Test Methods of Chill Testing of Cast Iron | |
| 313 | ASTM A368 | Standard Specification for Stainless Steel Wire Strand | |
| 314 | ASTM A369/A369M | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | |
| 315 | ASTM A370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | |
| 316 | ASTM A372/A372M | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels | |
| 317 | ASTM A376/A376M | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service | |
| 318 | ASTM A377 | Standard Index of Specifications for Ductile-Iron Pressure Pipe | |
| 319 | ASTM A380/A380M | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems | |
| 320 | ASTM A381 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems | |
| 321 | ASTM A384/A384M | Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies | |
| 322 | ASTM A385/A385M | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) | |
| 323 | ASTM A387/A387M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum | |
| 324 | ASTM A388/A388M | Standard Practice for Ultrasonic Examination of Steel Forgings | |
| 325 | ASTM A389/A389M | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service | |
| 326 | ASTM A390 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) | |
| 327 | ASTM A391/A391M | Standard Specification for Grade 80 Alloy Steel Chain | |
| 328 | ASTM A392 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric | |
| 329 | ASTM A394 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare | |
| 330 | ASTM A395/A395M | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | |
| 331 | ASTM A400 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties | |
| 332 | ASTM A401/A401M | Standard Specification for Steel Wire, Chromium-Silicon Alloy | |
| 333 | ASTM A403/A403M | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | |
| 334 | ASTM A407 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs | |
| 335 | ASTM A409/A409M | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service | |
| 336 | ASTM A411 | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire | |
| 337 | ASTM A413/A413M | Standard Specification for Carbon Steel Chain | |
| 338 | ASTM A414/A414M | Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels | |
| 339 | ASTM A416/A416M | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | |
| 340 | ASTM A418/A418M | Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings | |
| 341 | ASTM A420/A420M | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | |
| 342 | ASTM A421/A421M | Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete | |
| 343 | ASTM A423/A423M | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes | |
| 344 | ASTM A424/A424M | Standard Specification for Steel, Sheet, for Porcelain Enameling | |
| 345 | ASTM A426/A426M | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service | |
| 346 | ASTM A427/A427M | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction | |
| 347 | ASTM A428/A428M | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles | |
| 348 | ASTM A434/A434M | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered | |
| 349 | ASTM A435/A435M | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates | |
| 350 | ASTM A436 | Standard Specification for Austenitic Gray Iron Castings | |
| 351 | ASTM A437/A437M | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service | |
| 352 | ASTM A439/A439M | Standard Specification for Austenitic Ductile Iron Castings | |
| 353 | ASTM A447/A447M | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service | |
| 354 | ASTM A449 | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use | |
| 355 | ASTM A450/A450M | Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes | |
| 356 | ASTM A451/A451M | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service | |
| 357 | ASTM A453/A453M | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels | |
| 358 | ASTM A455/A455M | Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese | |
| 359 | ASTM A456/A456M | Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings | |
| 360 | ASTM A459 | Standard Specification for Zinc-Coated Flat Steel Armoring Tape | |
| 361 | ASTM A460 | Standard Specification for Copper-Clad Steel Wire Strand | |
| 362 | ASTM A463/A463M | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process | |
| 363 | ASTM A466/A466M | Standard Specification for Weldless Chain | |
| 364 | ASTM A467/A467M | Standard Specification for Machine and Coil Chain | |
| 365 | ASTM A469/A469M | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors | |
| 366 | ASTM A470/A470M | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts | |
| 367 | ASTM A471/A471M | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels | |
| 368 | ASTM A472/A472M | Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings | |
| 369 | ASTM A473 | Standard Specification for Stainless Steel Forgings | |
| 370 | ASTM A474 | Standard Specification for Aluminum-Coated Steel Wire Strand | |
| 371 | ASTM A475 | Standard Specification for Zinc-Coated Steel Wire Strand | |
| 372 | ASTM A476/A476M | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls | |
| 373 | ASTM A478 | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire | |
| 374 | ASTM A479/A479M | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | |
| 375 | ASTM A480/A480M | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | |
| 376 | ASTM A481 | Standard Specification for Chromium Metal | |
| 377 | ASTM A482/A482M | Standard Specification for Ferrochrome-Silicon | |
| 378 | ASTM A483/A483M | Standard Specification for Silicomanganese | |
| 379 | ASTM A484/A484M | Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings | |
| 380 | ASTM A485 | Standard Specification for High Hardenability Antifriction Bearing Steel | |
| 381 | ASTM A487/A487M | Standard Specification for Steel Castings Suitable for Pressure Service | |
| 382 | ASTM A488/A488M | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel | |
| 383 | ASTM A489 | Standard Specification for Carbon Steel Lifting Eyes | |
| 384 | ASTM A490/A490M | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength.Note:-(Withdrawn 2016, replaced by F3125/F3125M) | |
| 385 | ASTM A491 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric | |
| 386 | ASTM A492 | Standard Specification for Stainless Steel Rope Wire | |
| 387 | ASTM A493 | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging | |
| 388 | ASTM A494/A494M | Standard Specification for Castings, Nickel and Nickel Alloy | |
| 389 | ASTM A495 | Standard Specification for Calcium-Silicon Alloys | |
| 390 | ASTM A498/A498M | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins | |
| 391 | ASTM A499 | Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails | |
| 392 | ASTM A500/A500M | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes | |
| 393 | ASTM A501/A501M | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing | |
| 394 | ASTM A502 | Standard Specification for Rivets, Steel, Structural | |
| 395 | ASTM A503/A503M | Standard Specification for Ultrasonic Examination of Forged Crankshafts | |
| 396 | ASTM A504/A504M | Standard Specification for Wrought Carbon Steel Wheels | |
| 397 | ASTM A505 | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | |
| 398 | ASTM A506 | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | |
| 399 | ASTM A507 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | |
| 400 | ASTM A508/A508M | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels | |
| 401 | ASTM A510/A510M | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel | |
| 402 | ASTM A511/A511M | Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar | |
| 403 | ASTM A512 | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing | |
| 404 | ASTM A513/A513 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing | |
| 405 | ASTM A514/A514 | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding | |
| 406 | ASTM A515/A515M | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service | |
| 407 | ASTM A516/A516M | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service | |
| 408 | ASTM A517/A517M | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered | |
| 409 | ASTM A518/A518M | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings | |
| 410 | ASTM A519/A519 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing | |
| 411 | ASTM A521/A521M | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use | |
| 412 | ASTM A522/A522M | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service | |
| 413 | ASTM A523 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits | |
| 414 | ASTM A524 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures | |
| 415 | ASTM A529/A529M | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality | |
| 416 | ASTM A530/A530M | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe | |
| 417 | ASTM A531/A531M | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings | |
| 418 | ASTM A532/A532M | Standard Specification for Abrasion-Resistant Cast Irons | |
| 419 | ASTM A533/A533M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | |
| 420 | ASTM A534 | Standard Specification for Carburizing Steels for Anti-Friction Bearings | |
| 421 | ASTM A536 | Standard Specification for Ductile Iron Castings | |
| 422 | ASTM A537/A537M | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | |
| 423 | ASTM A540/A540M | Standard Specification for Alloy-Steel Bolting for Special Applications | |
| 424 | ASTM A541/A541M | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components | |
| 425 | ASTM A542/A542M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium | |
| 426 | ASTM A543/A543M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum | |
| 427 | ASTM A550 | Standard Specification for Ferrocolumbium (Ferroniobium) | |
| 428 | ASTM A551/A551M | Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications | |
| 429 | ASTM A553/A553M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9% Nickel | |
| 430 | ASTM A554 | Standard Specification for Welded Stainless Steel Mechanical Tubing | |
| 431 | ASTM A555/A555M | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods | |
| 432 | ASTM A556/A556M | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes | |
| 433 | ASTM A560/A560M | Standard Specification for Castings, Chromium-Nickel Alloy | |
| 434 | ASTM A561 | Standard Practice for Macroetch Testing of Tool Steel Bars | |
| 435 | ASTM A562/A562M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings | |
| 436 | ASTM A563M | Standard Specification for Carbon and Alloy Steel Nuts (Metric) | |
| 437 | ASTM A563 | Standard Specification for Carbon and Alloy Steel Nuts | |
| 438 | ASTM A564/A564M | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes | |
| 439 | ASTM A565/A565M | Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service | |
| 440 | ASTM A568/A568M | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | |
| 441 | ASTM A570 | Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled. Note:-(Withdrawn 2000, replaced by A1011/A1011M) | |
| 442 | ASTM A571/A571M | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service | |
| 443 | ASTM A572/A572M | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel | |
| 444 | ASTM A573/A573M | Standard Specification for Structural Carbon Steel Plates of Improved Toughness | |
| 445 | ASTM A574 | Standard Specification for Alloy Steel Socket-Head Cap Screws | |
| 446 | ASTM A575 | Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades | |
| 447 | ASTM A576 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality | |
| 448 | ASTM A577/A577M | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates | |
| 449 | ASTM A578/A578M | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications | |
| 450 | ASTM A579/A579M | Standard Specification for Superstrength Alloy Steel Forgings | |
| 451 | ASTM A580/A580M | Standard Specification for Stainless Steel Wire | |
| 452 | ASTM A581/A581M | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods | |
| 453 | ASTM A582/A582M | Standard Specification for Free-Machining Stainless Steel Bars | |
| 454 | ASTM A586 | Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand | |
| 455 | ASTM A587 | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry | |
| 456 | ASTM A588/A588M | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance | |
| 457 | ASTM A589/A589M | Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe | |
| 458 | ASTM A592/A592M | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels | |
| 459 | ASTM A595/A595M | Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use | |
| 460 | ASTM A596/A596M | Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens | |
| 461 | ASTM A597/A597M | Standard Specification for Cast Tool Steel | |
| 462 | ASTM A598/A598M | Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores | |
| 463 | ASTM A599/A599M | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet | |
| 464 | ASTM A600 | Standard Specification for Tool Steel High Speed | |
| 465 | ASTM A601/A601M | Standard Specification for Electrolytic Manganese Metal | |
| 466 | ASTM A602 | Standard Specification for Automotive Malleable Iron Castings | |
| 467 | ASTM A603 | Standard Specification for Zinc-Coated Steel Structural Wire Rope | |
| 468 | ASTM A604/A604M | Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets | |
| 469 | ASTM A606/A606M | Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance | |
| 470 | ASTM A608/A608M | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures | |
| 471 | ASTM A609/A609M | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof | |
| 472 | ASTM A610 | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size | |
| 473 | ASTM A612/A612M | Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service | |
| 474 | ASTM A615/A615M | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement | |
| 475 | ASTM A618/A618M | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing | |
| 476 | ASTM A623M | Standard Specification for Tin Mill Products, General Requirements [Metric] | |
| 477 | ASTM A623 | Standard Specification for Tin Mill Products, General Requirements | |
| 478 | ASTM A624/A624M | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced | |
| 479 | ASTM A625/A625M | Standard Specification for Tin Mill Products, Black Plate, Single-Reduced | |
| 480 | ASTM A626/A626M | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced | |
| 481 | ASTM A627 | Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities | |
| 482 | ASTM A630 | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate | |
| 483 | ASTM A632 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service | |
| 484 | ASTM A633/A633M | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates | |
| 485 | ASTM A635/A635M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for | |
| 486 | ASTM A636 | Standard Specification for Nickel Oxide Sinter | |
| 487 | ASTM A638/A638M | Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service | |
| 488 | ASTM A640 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable | |
| 489 | ASTM A641/A641M | Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire | |
| 490 | ASTM A644 | Standard Terminology Relating to Iron Castings | |
| 491 | ASTM A645/A645M | Standard Specification for Pressure Vessel Plates, 5% and 51 2% Nickel Alloy Steels, Specially Heat Treated | |
| 492 | ASTM A646/A646M | Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings | |
| 493 | ASTM A648 | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe | |
| 494 | ASTM A649/A649M | Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery | |
| 495 | ASTM A650/A650M | Standard Specification for Tin Mill Products, Black Plate, Double Reduced | |
| 496 | ASTM A653/A653M | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | |
| 497 | ASTM A656/A656M | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability | |
| 498 | ASTM A657/A657M | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced | |
| 499 | ASTM A659/A659M | Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled | |
| 500 | ASTM A660/A660M | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | |
| 501 | ASTM A662/A662M | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service | |
| 502 | ASTM A663/A663M | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties | |
| 503 | ASTM A664 | Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications | |
| 504 | ASTM A666 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar | |
| 505 | ASTM A667/A667M | Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders | |
| 506 | ASTM A668/A668M | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | |
| 507 | ASTM A671/A671M | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | |
| 508 | ASTM A672/A672M | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | |
| 509 | ASTM A673/A673M | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel | |
| 510 | ASTM A674 | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids | |
| 511 | ASTM A675/A675M | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties | |
| 512 | ASTM A677 | Standard Specification for Nonoriented Electrical Steel Fully Processed Types | |
| 513 | ASTM A679/A679M | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn | |
| 514 | ASTM A681 | Standard Specification for Tool Steels Alloy | |
| 515 | ASTM A683 | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types | |
| 516 | ASTM A684/A684M | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled | |
| 517 | ASTM A686 | Standard Specification for Tool Steel, Carbon | |
| 518 | ASTM A688/A688M | Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes | |
| 519 | ASTM A689 | Standard Specification for Carbon and Alloy Steel Bars for Springs | |
| 520 | ASTM A690/A690M | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments | |
| 521 | ASTM A691/A691M | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures | |
| 522 | ASTM A693 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | |
| 523 | ASTM A694/A694M | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service | |
| 524 | ASTM A696 | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components | |
| 525 | ASTM A697/A697M | Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods | |
| 526 | ASTM A698/A698M | Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields | |
| 527 | ASTM A700 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment | |
| 528 | ASTM A701/A701M | Standard Specification for Ferromanganese-Silicon | |
| 529 | ASTM A702 | Standard Specification for Steel Fence Posts, Hot Wrought | |
| 530 | ASTM A703/A703M | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts | |
| 531 | ASTM A704/A704M | Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement | |
| 532 | ASTM A705/A705M | Standard Specification for Age-Hardening Stainless Steel Forgings | |
| 533 | ASTM A706/A706M | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement | |
| 534 | ASTM A707/A707M | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service | |
| 535 | ASTM A709/A709M | Standard Specification for Structural Steel for Bridges | |
| 536 | ASTM A710/A710M | Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates | |
| 537 | ASTM A711/A711M | Standard Specification for Steel Forging Stock | |
| 538 | ASTM A712 | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys | |
| 539 | ASTM A713 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components | |
| 540 | ASTM A716 | Standard Specification for Ductile Iron Culvert Pipe | |
| 541 | ASTM A717/A717M | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens | |
| 542 | ASTM A719/A719M | Standard Test Method for Lamination Factor of Magnetic Materials | |
| 543 | ASTM A720/A720M | Standard Test Method for Ductility of Nonoriented Electrical Steel | |
| 544 | ASTM A721/A721M | Standard Test Method for Ductility of Oriented Electrical Steel | |
| 545 | ASTM A722/A722M | Standard Specification for High-Strength Steel Bars for Prestressed Concrete | |
| 546 | ASTM A723/A723M | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application | |
| 547 | ASTM A724/A724M | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels | |
| 548 | ASTM A726 | Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types | |
| 549 | ASTM A727/A727M | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness | |
| 550 | ASTM A729/A729M | Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service | |
| 551 | ASTM A732/A732M | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures | |
| 552 | ASTM A733 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples | |
| 553 | ASTM A734/A734M | Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered | |
| 554 | ASTM A735/A735M | Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service | |
| 555 | ASTM A736/A736M | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel | |
| 556 | ASTM A737/A737M | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel | |
| 557 | ASTM A738/A738M | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service | |
| 558 | ASTM A739 | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both | |
| 559 | ASTM A740 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) | |
| 560 | ASTM A741 | Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail | |
| 561 | ASTM A742/A742M | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe | |
| 562 | ASTM A743/A743M | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application | |
| 563 | ASTM A744/A744M | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | |
| 564 | ASTM A745/A745M | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings | |
| 565 | ASTM A746 | Standard Specification for Ductile Iron Gravity Sewer Pipe | |
| 566 | ASTM A747/A747M | Standard Specification for Steel Castings, Stainless, Precipitation Hardening | |
| 567 | ASTM A748/A748M | Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use | |
| 568 | ASTM A749/A749M | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for | |
| 569 | ASTM A751 | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products | |
| 570 | ASTM A753 | Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) | |
| 571 | ASTM A754/A754M | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence | |
| 572 | ASTM A755/A755M | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products | |
| 573 | ASTM A756 | Standard Specification for Stainless Anti-Friction Bearing Steel | |
| 574 | ASTM A757/A757M | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service | |
| 575 | ASTM A758/A758M | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness | |
| 576 | ASTM A759 | Standard Specification for Carbon Steel Crane Rails | |
| 577 | ASTM A760/A760M | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains | |
| 578 | ASTM A761/A761M | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches | |
| 579 | ASTM A762/A762M | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains | |
| 580 | ASTM A763 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels | |
| 581 | ASTM A764 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs | |
| 582 | ASTM A765/A765M | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements | |
| 583 | ASTM A767/A767M | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement | |
| 584 | ASTM A768/A768M | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts | |
| 585 | ASTM A769/A769M | Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes | |
| 586 | ASTM A770/A770M | Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications | |
| 587 | ASTM A772/A772M | Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current | |
| 588 | ASTM A773/A773M | Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs | |
| 589 | ASTM A774/A774M | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures | |
| 590 | ASTM A775/A775M | Standard Specification for Epoxy-Coated Steel Reinforcing Bars | |
| 591 | ASTM A778/A778M | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products | |
| 592 | ASTM A779/A779M | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete | |
| 593 | ASTM A780/A780M | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings | |
| 594 | ASTM A781/A781M | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
| 595 | ASTM A786/A786M | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates | |
| 596 | ASTM A787/A787M | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing | |
| 597 | ASTM A788/A788M | Standard Specification for Steel Forgings, General Requirements | |
| 598 | ASTM A789/A789M | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service | |
| 599 | ASTM A790/A790M | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe | |
| 600 | ASTM A792/A792M - 10(2015) | Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process | |
| 601 | ASTM A793 | Standard Specification for Rolled Floor Plate, Stainless Steel | |
| 602 | ASTM A794/A794M | Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled | |
| 603 | ASTM A795/A795M | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use | |
| 604 | ASTM A796/A796M | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications | |
| 605 | ASTM A798/A798M | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications | |
| 606 | ASTM A799/A799M | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content | |
| 607 | ASTM A800/A800M | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | |
| 608 | ASTM A801 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) | |
| 609 | ASTM A802 | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination | |
| 610 | ASTM A803/A803M | Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes | |
| 611 | ASTM A804/A804M | Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens | |
| 612 | ASTM A805/A805M | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled | |
| 613 | ASTM A807/A807M | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications | |
| 614 | ASTM A809 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire | |
| 615 | ASTM A810 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh | |
| 616 | ASTM A811 | Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques | |
| 617 | ASTM A813/A813M | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe | |
| 618 | ASTM A814/A814M | Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe | |
| 619 | ASTM A815/A815M | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings | |
| 620 | ASTM A817 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire | |
| 621 | ASTM A818 | Standard Specification for Coppered Carbon Steel Wire | |
| 622 | ASTM A820/A820M | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete | |
| 623 | ASTM A821/A821M | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks | |
| 624 | ASTM A822/A822M | Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service | |
| 625 | ASTM A823 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings | |
| 626 | ASTM A824 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence | |
| 627 | ASTM A827/A827M | Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications | |
| 628 | ASTM A829/A829M | Standard Specification for Alloy Structural Steel Plates | |
| 629 | ASTM A830/A830M | Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements | |
| 630 | ASTM A832/A832M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium | |
| 631 | ASTM A833 | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers | |
| 632 | ASTM A834 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use | |
| 633 | ASTM A835/A835M | Standard Specification for Sizes of Ferroalloys and Alloy Additives | |
| 634 | ASTM A836/A836M | Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service | |
| 635 | ASTM A837/A837M | Standard Specification for Steel Forgings, Alloy, for Carburizing Applications | |
| 636 | ASTM A838 | Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications | |
| 637 | ASTM A839 | Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications | |
| 638 | ASTM A841/A841M | Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) | |
| 639 | ASTM A842 | Standard Specification for Compacted Graphite Iron Castings | |
| 640 | ASTM A844/A844M | Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process | |
| 641 | ASTM A847/A847M | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance | |
| 642 | ASTM A848 | Standard Specification for Low-Carbon Magnetic Iron | |
| 643 | ASTM A849 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe | |
| 644 | ASTM A853 | Standard Specification for Steel Wire, Carbon, for General Use | |
| 645 | ASTM A854/A854M | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire | |
| 646 | ASTM A855/A855M | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand | |
| 647 | ASTM A856/A856M | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire | |
| 648 | ASTM A857/A857M | Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage | |
| 649 | ASTM A858/A858M | Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service | |
| 650 | ASTM A859/A859M | Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components | |
| 651 | ASTM A860/A860M | Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings | |
| 652 | ASTM A861 | Standard Specification for High-Silicon Iron Pipe and Fittings | |
| 653 | ASTM A862/A862M | Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe | |
| 654 | ASTM A865/A865M | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints | |
| 655 | ASTM A866 | Standard Specification for Medium Carbon Anti-Friction Bearing Steel | |
| 656 | ASTM A867 | Standard Specification for Iron-Silicon Relay Steels | |
| 657 | ASTM A871/A871M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance | |
| 658 | ASTM A872/A872M | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments | |
| 659 | ASTM A874/A874M | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service | |
| 660 | ASTM A875/A875M | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process | |
| 661 | ASTM A876 | Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types | |
| 662 | ASTM A877/A877M | Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality | |
| 663 | ASTM A878/A878M | Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality | |
| 664 | ASTM A879/A879M | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
| 665 | ASTM A881/A881M | Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete | |
| 666 | ASTM A882/A882M | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand | |
| 667 | ASTM A884/A884M | Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement | |
| 668 | ASTM A886/A886M | Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete | |
| 669 | ASTM A887 | Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application | |
| 670 | ASTM A888 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications | |
| 671 | ASTM A889/A889M | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame | |
| 672 | ASTM A890/A890M | Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application | |
| 673 | ASTM A891/A891M | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels | |
| 674 | ASTM A892 | Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels | |
| 675 | ASTM A893/A893M | Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies | |
| 676 | ASTM A895 | Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip | |
| 677 | ASTM A896/A896M | Standard Practice for Conducting Case Studies on Galvanized Structures | |
| 678 | ASTM A897/A897M | Standard Specification for Austempered Ductile Iron Castings | |
| 679 | ASTM A898/A898M | Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes | |
| 680 | ASTM A899 | Standard Specification for Steel Wire, Epoxy-Coated | |
| 681 | ASTM A900/A900M | Standard Test Method for Lamination Factor of Amorphous Magnetic Strip | |
| 682 | ASTM A901 | Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types | |
| 683 | ASTM A902 | Standard Terminology Relating to Metallic Coated Steel Products | |
| 684 | ASTM A903/A903M | Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection | |
| 685 | ASTM A904 | Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts | |
| 686 | ASTM A905 | Standard Specification for Steel Wire, Pressure Vessel Winding | |
| 687 | ASTM A906/A906M | Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting | |
| 688 | ASTM A908 | Standard Specification for Stainless Steel Needle Tubing | |
| 689 | ASTM A909/A909M | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use | |
| 690 | ASTM A910/A910M | Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete | |
| 691 | ASTM A911/A911M | Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties | |
| 692 | ASTM A912/A912M | Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens | |
| 693 | ASTM A913/A913M | Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) | |
| 694 | ASTM A914/A914M | Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements | |
| 695 | ASTM A915/A915M | Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades | |
| 696 | ASTM A917 | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) | |
| 697 | ASTM A918 | Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
| 698 | ASTM A920/A920M | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties | |
| 699 | ASTM A921/A921M | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging | |
| 700 | ASTM A922 | Standard Specification for Silicon Metal | |
| 701 | ASTM A923 | Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels | |
| 702 | ASTM A924/A924M | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process | |
| 703 | ASTM A925 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand | |
| 704 | ASTM A927/A927M | Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method | |
| 705 | ASTM A928/A928M | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal | |
| 706 | ASTM A929/A929M | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe | |
| 707 | ASTM A930 | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits | |
| 708 | ASTM A931 | Standard Test Method for Tension Testing of Wire Ropes and Strand | |
| 709 | ASTM A932/A932M | Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens | |
| 710 | ASTM A934/A934M | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars | |
| 711 | ASTM A937/A937M | Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces | |
| 712 | ASTM A938 | Standard Test Method for Torsion Testing of Wire | |
| 713 | ASTM A939/A939M | Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings | |
| 714 | ASTM A940/A940M | Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors | |
| 715 | ASTM A941 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
| 716 | ASTM A942/A942M | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells | |
| 717 | ASTM A943/A943M | Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes | |
| 718 | ASTM A944 | Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens | |
| 719 | ASTM A945/A945M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness | |
| 720 | ASTM A947M | Standard Specification for Textured Stainless Steel Sheet [Metric] | |
| 721 | ASTM A949/A949M | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe | |
| 722 | ASTM A950/A950M | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling | |
| 723 | ASTM A951/A951M | Standard Specification for Steel Wire for Masonry Joint Reinforcement | |
| 724 | ASTM A952/A952M | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links | |
| 725 | ASTM A955/A955M | Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement | |
| 726 | ASTM A956 | Standard Test Method for Leeb Hardness Testing of Steel Products | |
| 727 | ASTM A957/A957M | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
| 728 | ASTM A958/A958M | Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades | |
| 729 | ASTM A959 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels | |
| 730 | ASTM A960/A960M | Standard Specification for Common Requirements for Wrought Steel Piping Fittings | |
| 731 | ASTM A961/A961M | Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications | |
| 732 | ASTM A962/A962M | Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range | |
| 733 | ASTM A964/A964M | Standard Specification for Corrugated Steel Box Culverts | |
| 734 | ASTM A965/A965M | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts | |
| 735 | ASTM A966/A966M | Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current | |
| 736 | ASTM A967/A967M | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts | |
| 737 | ASTM A968/A968M | Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service | |
| 738 | ASTM A970/A970M | Standard Specification for Headed Steel Bars for Concrete Reinforcement | |
| 739 | ASTM A971/A971M | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils | |
| 740 | ASTM A972/A972M | Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles | |
| 741 | ASTM A973/A973M | Standard Specification for Grade 100 Alloy Steel Chain | |
| 742 | ASTM A974 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) | |
| 743 | ASTM A975 | Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) | |
| 744 | ASTM A976 | Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application | |
| 745 | ASTM A977/A977M | Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs | |
| 746 | ASTM A978/A978M | Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications | |
| 747 | ASTM A979/A979M | Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field | |
| 748 | ASTM A980/A980M | Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled | |
| 749 | ASTM A981/A981M | Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors | |
| 750 | ASTM A982/A982M | Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils | |
| 751 | ASTM A983/A983M | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines | |
| 752 | ASTM A985/A985M | Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts | |
| 753 | ASTM A986/A986M | Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings | |
| 754 | ASTM A987/A987M | Standard Practice for Measuring Shape Characteristics of Tin Mill Products | |
| 755 | ASTM A988/A988M | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | |
| 756 | ASTM A989/A989M | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | |
| 757 | ASTM A990/A990M | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service | |
| 758 | ASTM A991/A991M | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products | |
| 759 | ASTM A992/A992M | Standard Specification for Structural Steel Shapes | |
| 760 | ASTM A994 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys | |
| 761 | ASTM A995/A995M | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts | |
| 762 | ASTM A996/A996M | Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement | |
| 763 | ASTM A997 | Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination | |
| 764 | ASTM A998/A998M | Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications | |
| 765 | ASTM A999/A999M | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe | |
| 766 | ASTM A1000/A1000M | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality | |
| 767 | ASTM A1001 | Standard Specification for High Strength Steel Castings in Heavy Sections | |
| 768 | ASTM A1002 | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy | |
| 769 | ASTM A1003/A1003M | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members | |
| 770 | ASTM A1004/A1004M | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members | |
| 771 | ASTM A1007 | Standard Specification for Carbon Steel Wire for Wire Rope | |
| 772 | ASTM A1008/A1008M | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | |
| 773 | ASTM A1009 | Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications | |
| 774 | ASTM A1010/A1010M | Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip | |
| 775 | ASTM A1011/A1011M | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | |
| 776 | ASTM A1012 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins | |
| 777 | ASTM A1013 | Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method | |
| 778 | ASTM A1014/A1014M | Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service | |
| 779 | ASTM A1015 | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications | |
| 780 | ASTM A1016/A1016M | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | |
| 781 | ASTM A1017/A1017M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten | |
| 782 | ASTM A1018/A1018M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | |
| 783 | ASTM A1020/A1020M | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications | |
| 784 | ASTM A1021/A1021M | Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service | |
| 785 | ASTM A1022/A1022M | Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement | |
| 786 | ASTM A1023/A1023M | Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes | |
| 787 | ASTM A1024/A1024M | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless | |
| 788 | ASTM A1025/A1025M | Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements | |
| 789 | ASTM A1028 | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils | |
| 790 | ASTM A1030/A1030M | Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products | |
| 791 | ASTM A1031/A1031M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled | |
| 792 | ASTM A1032 | Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe | |
| 793 | ASTM A1033 | Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations | |
| 794 | ASTM A1034/A1034M | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars | |
| 795 | ASTM A1035/A1035M | Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement | |
| 796 | ASTM A1036 | Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers | |
| 797 | ASTM A1037/A1037M | Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded | |
| 798 | ASTM A1038 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | |
| 799 | ASTM A1039/A1039M | Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process | |
| 800 | ASTM A1040 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels | |
| 801 | ASTM A1043/A1043M | Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings | |
| 802 | ASTM A1044/A1044M | Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete | |
| 803 | ASTM A1045 | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems | |
| 804 | ASTM A1046/A1046M | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process | |
| 805 | ASTM A1047/A1047M | Standard Test Method for Pneumatic Leak Testing of Tubing | |
| 806 | ASTM A1049/A1049M | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | |
| 807 | ASTM A1053/A1053M | Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe | |
| 808 | ASTM A1054 | Standard Specification for Sintered Ferrite Permanent Magnets | |
| 809 | ASTM A1055/A1055M | Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars | |
| 810 | ASTM A1056 | Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings | |
| 811 | ASTM A1057/A1057M | Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process | |
| 812 | ASTM A1058 | Standard Test Methods for Mechanical Testing of Steel Products—Metric | |
| 813 | ASTM A1059/A1059M | Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products | |
| 814 | ASTM A1060/A1060M | Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete | |
| 815 | ASTM A1061/A1061M | Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand | |
| 816 | ASTM A1062 | Standard Specification for Steel Castings Sampling | |
| 817 | ASTM A1063/A1063M | Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process | |
| 818 | ASTM A1064/A1064M | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete | |
| 819 | ASTM A1065/A1065M | Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point | |
| 820 | ASTM A1066/A1066M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP) | |
| 821 | ASTM A1067/A1067M | Standard Specification for Test Coupons for Steel Castings | |
| 822 | ASTM A1068 | Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products | |
| 823 | ASTM A1069/A1069M | Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes | |
| 824 | ASTM A1070 | Standard Specification for Cast and Sintered Alnico Permanent Magnets | |
| 825 | ASTM A1071/A1071M | Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys | |
| 826 | ASTM A1072/A1072M | Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products | |
| 827 | ASTM A1073/A1073M | Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet | |
| 828 | ASTM A1074 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals | |
| 829 | ASTM A1075 | Standard Specification for Flanged Steel U-Channel Posts | |
| 830 | ASTM A1076/A1076M | Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel | |
| 831 | ASTM A1077/A1077M | Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings | |
| 832 | ASTM A1078/A1078M | Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement | |
| 833 | ASTM A1079 | Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | |
| 834 | ASTM A1080 | Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings | |
| 835 | ASTM A1081/A1081M | Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand | |
| 836 | ASTM A1082/A1082M | Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications | |
| 837 | ASTM A1083/A1083M | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process | |
| 838 | ASTM A1084 | Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels | |
| 839 | ASTM A1085/A1085M | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) | |
| 840 | ASTM A1086 | Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types | |
| 841 | ASTM A1087/A1087M | Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet | |
| 842 | ASTM A1088 | Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP) | |
| 843 | ASTM A1089/A1089M | Standard Specification for Highly Loaded Anti-Friction Bearing Steel | |
| 844 | ASTM A1090/A1090M | Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance | |
| 845 | ASTM A1091/A1091M | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service | |
| 846 | ASTM A1092 | Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet | |
| 847 | ASTM A1093/A1093M | Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials | |
| 848 | ASTM A1094/A1094M | Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement | |
| 849 | ASTM A1095 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings | |
| 850 | ASTM A1096/A1096M | Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement | |
| 851 | ASTM A1097 | Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger) | |
| 852 | ASTM A1098/A1098M | Standard Specification for Welded Austenitic Alloy Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s) | |
| 853 | ASTM A1099/A1099M | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels | |
| 854 | ASTM A1100 | Standard Guide for Qualification and Control of Induction Heat Treating | |
| 855 | ASTM A1101 | Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets | |
| 856 | ASTM A1102 | Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets | |
| 857 | ASTM A1103/A1103M | Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications | |
| 858 | ASTM A1106/A1106M | Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application |
SAP T-CODE
| SL NO | |||
|---|---|---|---|
| 1 | YRMI051 | ADD MATERIAL CODE IN PLANT | SCM |
| 2 | XK01 | ADD VENDOR | SCM |
| 3 | MM60 | CHECK PLANT CODE | SCM |
| 4 | YRMR020 | CHECK VENDOR GST DETAILS | SCM |
| 5 | MM03 | DISPLAY MATERIAL | SCM |
| 6 | ME22N | EDIT PO | SCM |
| 7 | YRMR226 | FOREIGN EXCHANGE PO REPORT | SCM |
| 8 | ME1M | MATERIAL BACKUP RECORD | SCM |
| 9 | MB24 | IVENTORY MANAGEMET | SCM |
| 10 | ME31K | OUTLINE AGREEMENT (CREATE CONTRACT) | SCM |
| 11 | ME32K | OUTLINE AGREEMENT (CREATE CONTRACT)_EDIT | SCM |
| 12 | ME35K | OUTLINE AGGREMENT (CREATE CONTRACT)_RELI | SCM |
| 13 | ME9K | OUTLINE AGGREMENT (PRINT) | SCM |
| 14 | ME9F | PO PRINT (PRINT) | SCM |
| 15 | ME29N | PO RELEASED | SCM |
| 16 | CN52N | PR CHECK | SCM |
| 17 | ME53N | PR DISPLAY | SCM |
| 18 | ME54N | PR EDIT / RELEASE | SCM |
| 19 | YRMS014 | PR PRINT | SCM |
| 20 | CJ20N | PR/NETWORK CREATE | SCM |
| 21 | CN46N | PR-LIST | SCM |
| 22 | CN47N | PR-LIST | SCM |
| 23 | ME41 | RFQ CREATE | SCM |
| 24 | ME42 | RFQ DETAILS CHANGE | SCM |
| 25 | ME4L | RFQ DETAILS CHECK | SCM |
| 26 | ME47 | RFQ MAINTAIN QUOTATION (FOR PO) | SCM |
| 27 | YRMR036 | SEARCH ITEMS/ MATERIAL CODE | SCM |
| 28 | XK03 | SEARCH VENDOR CODE | SCM |
| 29 | YRMG017 | ULOAD FILE FOR FOREIGN BIDDERS | SCM |
| 30 | YRMG016 | UPDATE HSN/CONTROL CODE | SCM |
| 31 | MKVZ | VENDOR | SCM |
| 32 | CN43N | WBS CODE | SCM |
| 33 | YRMR267 | CPS REPORT | SCM |
| 34 | YRMR052 | CHECK BLOCK MATERIAL CODE (INDICATOR 4) | SCM |
| 35 | ML81N | CREATE SERVICE ENTRY SHEET (SES) | SUB-CONTACTOR |
| 36 | ML83 | PRINT SERVICE ENTRY SHEET (SES) | SUB-CONTACTOR |
| 37 | MIGO | POST GOODS MOVEMENT | FOR GRV |
| 38 | QA11 | GRV INSPETION | FOR GRV |
| 39 | YRMS002 | PRINT GRV | FOR GRV |
| 40 | YRMS004 | PRINT GIV | FOR GRV |
| 41 | MB51 | MATERIAL DOC LIST ISSUED & RECEIVED | STOCK REPORT |
| 42 | MB52 | LIST OF WAREHOUSE STOCKS ON HAND | STOCK REPORT |
| 43 | ME43 | DISPLAY RFQ/QUOTATION | REPORT |
| 44 | ME33L | DISPLAY SCHEDULING AGREEMENT | REPORT |
| 45 | MEQ3 | DISPLAY QUOTA ARRANGEMENT | REPORT |
| 46 | ME23N | DISPLAY PURCHASE ORDER | REPORT |
| 47 | MIR5 | DISPLAY LIST OF INVOICE DOCUMENTS | REPORT |
| 48 | MBLB | VENDOR WISE PURCHESE ORDER | VENDOR DETAILS |
| 49 | ME2N | PO DOC ORDER QTY AGAINST RECEIVED QTY | VENDOR DETAILS |
| 50 | MMBE | STOCK OVERVIEW | GENERAL |
| 51 | MB5T | STOCK IN TRANSIT | GENERAL |
| 52 | YRMR030 | PO ITEMS / MATERIAL DETAILS | GENERAL |
| 53 | ME80FN | PO ITEMS / MATERIAL DETAILS | GENERAL |
| 54 | FBL1N | VENDOR PAYMENT HISTORY | GENERAL |
| 55 | ML84 | SES NUMBER AND PAYMENT HISTORY | GENERAL |
| 56 | YMBBS | NET STOCK | GENERAL |
| 57 | ME21N | CREATE PURCHASE ORDER/STO | GENERAL |
| 58 | MSRV6 | VENDOR DETAILS SES | GENERAL |
| 59 | ML81 | SES ENTRY | GENERAL |
| 60 | MRRL | EVALUATED RECEIPT SETTLEMENT | OTHERS |
| 61 | MMB1 | CREATE SEMI FINISHED PRODUCT | OTHERS |
| 62 | MMF1 | CREATE FINISHED PRODUCT | OTHERS |
| 63 | MMG1 | CREATE RETURNABLE PACKAGING | OTHERS |
| 64 | MMH1 | CREATE TRADING GOODS | OTHERS |
| 65 | MMI1 | CREATE OPERATING SUPPLIES | OTHERS |
| 66 | MMK1 | CREATE CONFIGURABLE MATERIAL | OTHERS |
| 67 | MMN1 | CREATE NON-STOCK MATERIAL | OTHERS |
| 68 | MB21 | CREATE RESERVATION | OTHERS |
| 69 | MBST | CANCEL MATERIAL DOCUMENT | OTHERS |
| 70 | OX15 | CREATE COMPANY | OTHERS |
| 71 | OX02 | CREATE COMPANY CODE | OTHERS |
| 72 | OX10 | CREATE PLANT | OTHERS |
| 73 | OX09 | CREATE STORAGE LOCATION | OTHERS |
| 74 | OX08 | CREATE PURCHASING ORGANIZATION | OTHERS |
| 75 | OME4 | CREATE PURCHASING GROUP | OTHERS |
| 76 | OX18 | ASSIGN PLANT TO COMPANY CODE | OTHERS |
| 77 | OX01 | ASSIGN PURCHASING ORGANIZATION TO COMPANY CODE | OTHERS |
| 78 | OX17 | ASSIGN PURCHASING ORGANIZATION TO PLANT | OTHERS |
| 79 | MM01 | CREATE MATERIAL | OTHERS |
| 80 | MM02 | CHANGE MATERIAL | OTHERS |
| 81 | MMDE | DELETE ALL MATERIALS | OTHERS |
| 82 | MMNR | DEFINE MATERIAL MASTER NUMBER RANGES | OTHERS |
| 83 | XK02 | CHANGE VENDOR | OTHERS |
| 84 | ML33 | CREATE VENDOR CONDITIONS | OTHERS |
| 85 | ME11 | MAINTAIN PURCHASING INFO RECORD | OTHERS |
| 86 | ME01 | MAINTAIN SOURCE LIST | OTHERS |
| 87 | ME51N | CREATE PURCHASE REQUISITION | OTHERS |
| 88 | ME52N | CHANGE PURCHASE REQUISITION | OTHERS |
| 89 | ME31L | CREATE SCHEDULING AGREEMENT | OTHERS |
| 90 | ME32L | CHANGE SCHEDULING AGREEMENT | OTHERS |
| 91 | MEQ1 | CREATE QUOTA ARRANGEMENT | OTHERS |
| 92 | MEQ2 | CHANGE QUOTA ARRANGEMENT | OTHERS |
| 93 | ME59N | AUTOMATIC GENERATION OF PURCHASE ORDER | OTHERS |
| 94 | MB1A | GOODS WITHDRAWAL | OTHERS |
| 95 | MB1B | TRANSFER POSTING | OTHERS |
| 96 | MB1C | POST OTHER GOODS RECEIPTS | OTHERS |
| 97 | MB01 | POST GOODS RECEIPT FOR PURCHASE ORDER | OTHERS |
| 98 | OMJJ | CUSTOMIZING: DEFINE NEW MOVEMENT TYPES | OTHERS |
| 99 | MIRO | ENTER INCOMING INVOICE | OTHERS |
| 100 | MIRA | FAST INVOICE ENTRY | OTHERS |
| 101 | MR8M | CANCEL INVOICE DOCUMENT | OTHERS |
| 102 | MRBR | RELEASE BLOCKED INVOICES | OTHERS |
| 103 | OMR6 | TOLERANCE LIMITS: INVOICE VERIFICATION | OTHERS |
| 104 | MIR6 | INVOICE OVERVIEW | OTHERS |
| 105 | MIR7 | PARK INVOICE | OTHERS |
| 106 | MRIS | SETTLE INVOICING PLAN | OTHERS |
| 107 | AC02 | SERVICE MASTER | OTHERS |
| 108 | YRMS026 | Composite Purchase Order (i.e for output type NEC)- PRINT | SCM |
| 109 | YRMS025 | Material Purchase Order (i.e for output type NES)- PRINT | SCM |
| 110 | YRMF007 | Purchase Order No. and Amendment (Print | SCM |
| 111 | YRMS006 | SERVICE ENTY SHEET (SES) -PRINT | SUB-CONTACTOR |
| 112 | YRCR051 | SERVICE ENTY SHEET (SES) DATA IMPORT ANJANI PORTAL | SUB-CONTACTOR |
| 113 | YRMR143 | CHECK NON-MOVING STOCK | SCM |
| 114 | /n/OPT/VIM_WP | VIM FOR Bill Processing | SCM |
| 115 | /n/OPT/VIM_VA2 | VIM FOR view the bills | SCM |
| 116 | S_ALR_87013558 | Check Budget Overview | PROJECT |
| 117 | YRMG063 | Upload SES to process | PROJECT |
MATERIAL CLASSIFICATION
MATERIAL CODE RECEIVED OR PENDING
| SL NO | TOTAL ITEMS | SENT_GAIL | PENDING DAYS | MATERIAL NAME | ||
|---|---|---|---|---|---|---|
| 1 | B378-999-XM-MR-0560 | 25 | 28-Jun-22 | 04-Oct-22 | - Days | PLANT COMMUNATION |
| 1 | B378-000-WB-MR-3031 | 1 | 21-Jun-22 | 23-Jun-22 | - Days | BUTTERFLY VALVE |
| 2 | B378-000-WB-MR-3035 | 4 | 21-Jun-22 | 23-Jun-22 | - Days | MOTOR OPERATED VALVE |
| 3 | B378-101-EE-MR-6012 | 4 | 22-Jul-22 | 28-Jul-22 | - Days | REACTOR EFFLUENT COO |
| 4 | B378-111-RA-MR-6031 | 2 | 21-Jun-22 | 28-Jun-22 | - Days | REACTOR |
| 5 | B378-000-WD-MR-3022 | 67 | 12-Jul-22 | 26-Sep-22 | - Days | ELBOW |
| 6 | B378-000-WD-MR-3121 | 48 | 12-Jul-22 | 26-Sep-22 | - Days | ELBOW |
| 7 | B378-111-16-43-4140 | 1 | 12-Jul-22 | 03-Sep-22 | - Days | PNEUMATIC CONVEYING |
| 8 | B378-000-YF-MR-1320 | 171 | 21-Jul-22 | 28-Oct-22 | - Days | SQUARE EDGE ORIFICE |
| 9 | B378-000-WA-MR-3104 | 11 | 21-Jul-22 | 21-Sep-22 | - Days | SEAMLESS PIPE |
| 10 | B378-000-WB-MR-3030 | 21 | 31-Jul-22 | 21-Sep-22 | - Days | GATE VALVE |
| 11 | B378-000-YL-MR-1220 | 79 | 31-Jul-22 | 28-Sep-22 | - Days | MAGNETIC LEVEL GAUGE |
| 12 | B378-000-WB-MR-3130 | 76 | 31-Jul-22 | 27-Oct-22 | - Days | GATE VALVE |
| 13 | B378-200-QY-MR-9150 | 6 | 31-Jul-22 | 15-Sep-22 | - Days | GATE VALVE |
| 14 | B378-101-KA-MR-5110 | 1 | 31-Jul-22 | 21-Sep-22 | - Days | PRODUCT SPLITTER HEA |
| 15 | B378-101-EE-MR-6021 | 1 | 09-Aug-22 | 21-Sep-22 | - Days | PRODUCT SPLITTER REF |
| 16 | B378-000-YF-MR-1840 | 4 | 09-Aug-22 | 21-Sep-22 | - Days | FLOW NOZZLE |
| 17 | B378-101-EE-MR-6022 | 2 | 06-Sep-22 | 15-Sep-22 | - Days | DEOILER SIDE REBOILE |
| 18 | B378-111-CC-MR-6032 | 2 | 20-Aug-22 | 03-Sep-22 | - Days | PROPYLENE DEGASSING |
| 19 | B378-111-KA-MR-5230 | 1 | 20-Aug-22 | 27-Aug-22 | - Days | VENT RECOVERY COMPRE |
| 20 | B378-111-KA-MR-5210 | 1 | 20-Aug-22 | 27-Aug-22 | - Days | CYCLE GAS COMPRESSOR |
| 21 | B378-101-CC-MR-6023 | 2 | 22-Aug-22 | 03-Sep-22 | - Days | DEOILER |
| 22 | B378-101-EE-MR-6015 | 2 | 27-Sep-22 | 27-Oct-22 | - Days | PRODUCT SPLITTER REB |
| 23 | B378-101-EE-MR-6018 | 4 | 31-Aug-22 | 21-Sep-22 | - Days | PROPANE REGENERATION |
| 24 | B378-000-WE-MR-3150 | 283 | 31-Aug-22 | 14-Sep-22 | - Days | STUD BOLT |
| 25 | B378-101-VV-MR-6007 | 25 | 06-Sep-22 | 27-Sep-22 | - Days | BLOWDOWN FLASH DRUM |
| 26 | B378-101-VV-MR-6010 | 7 | 06-Sep-22 | 21-Sep-22 | - Days | DEETHANIZER FEED DRY |
| 26 | B378-112-GY-MR-4130 | 1 | 14-Sep-22 | 09-Oct-22 | - Days | EXTRUDER & PELLETIZE |
| 27 | B378-112-GY-MR-4150 | 1 | 14-Sep-22 | 09-Oct-22 | - Days | BAGGING AND PALLETIZ |
| 28 | B378-000-YF-MR-2152 | 1 | 14-Sep-22 | 22-Sep-22 | - Days | GAS METERING SKID |
| 29 | B378-000-WC-MR-3010 | 39 | 14-Sep-22 | 22-Oct-22 | - Days | FLANGE |
| 30 | B378-000-WC-MR-3112 | 33 | 18-Sep-22 | 03-Oct-22 | - Days | SW FLANGE SIZE 0.75 |
| 31 | B378-000-YC-MR-1330 | 154 | 22-Sep-22 | 18-Nov-22 | - Days | CONTROL VALVE ,6", 3 |
| 32 | B378-999-XN-MR-0481 | 1 | 22-Sep-22 | 09-Oct-22 | - Days | FIRE ALARM SYSTEM |
| 33 | B378-000-WA-MR-3106 | 5 | 22-Sep-22 | 27-Sep-22 | - Days | PIPE, B-36.10 , SIZE |
| 34 | B378-999-XD-MR-0120 | 4 | 30-Sep-22 | 22-Oct-22 | - Days | TRANSFORMER- 0.63 MV |
| 35 | B378-111-CT-MR-6830 | 2 | 07-Oct-22 | 17-Oct-22 | - Days | VALVE TRAYS AND ASSO |
| 36 | B378-101-VV-MR-6020 | 6 | 07-Oct-22 | 17-Oct-22 | - Days | PRODUCT GAS DRYER KO |
| 37 | B378-200-LZ-MR-4520 | 1 | 07-Oct-22 | 09-Oct-22 | - Days | EMERGENCY EVACUATION |
| 38 | B378-123-KA-MR-5620 | 1 | 09-Oct-22 | 17-Oct-22 | - Days | HP AIR COMPRESSOR |
| 39 | B378-000-WA-MR-3002 | 17 | 11-Oct-22 | 17-Oct-22 | - Days | SEAMLESS PIPE,4.0 IN |
| 40 | B378-111-KA-MR-5220 | 1 | 11-Oct-22 | 14-Oct-22 | - Days | NITROGEN COMPRESSOR |
| 41 | B378-131-KA-MR-5940 | 2 | 17-Oct-22 | 27-Oct-22 | - Days | HYDROGEN BOOSTER COM |
| 42 | B378-123-KA-MR-5630 | 1 | 17-Oct-22 | 27-Oct-22 | - Days | LP AIR COMPRESSOR |
| 43 | B378-000-WA-MR-3105 | 13 | 17-Oct-22 | 22-Oct-22 | - Days | PIPE, B-36.19, SIZE1 |
| 44 | B378-111-KA-MR-5270 | 1 | 21-Oct-22 | 28-Oct-22 | - Days | HYDROGEN COMPRESSOR |
| 45 | B378-000-WF-MR-3140 | 252 | 21-Oct-22 | 09-Nov-22 | - Days | GSKT, B-16.20-ANSI B |
| 46 | B378-131-LZ-MR-4340 | 1 | 21-Oct-22 | 28-Oct-22 | - Days | WEIGH BRIDGE (SAFE A |
| 51 | B378-000-YR-MR-1360 | 104 | 26-Oct-22 | 09-Nov-22 | - Days | PRESSURE RELIEF VALV |
| 52 | B378-000-WC-MR-3111 | 134 | 26-Oct-22 | 18-Nov-22 | - Days | FLNG.SW, B-16.5, AST |
| 53 | B378-000-WA-MR-3102 | 38 | 01-Nov-22 | 18-Nov-22 | - Days | SEAMLESS PIPE, B-36. |
| 54 | B378-000-WB-MR-3134 | 4 | 03-Nov-22 | 10-Nov-22 | - Days | BUTTER FLY VALVE 36. |
| 55 | B378-103-LP-MR-4160 | 1 | 03-Nov-22 | 21-Nov-22 | - Days | PSA HYDROGEN PACKAGE |
| 56 | B378-000-YT-MR-2415 | 1 | 09-Nov-22 | 10-Nov-22 | - Days | THERMOCOUPLES & THER |
| 57 | B378-000-WD-MR-3122 | 198 | 09-Nov-22 | 07-Dec-22 | - Days | ELBOW.90, B-16.11, A |
| 58 | B378-000-WB-MR-3136 | 62 | 13-Nov-22 | 21-Nov-22 | - Days | BALL VALVE, 0.75 INC |
| 59 | B378-000-WC-MR-3110 | 365 | 13-Nov-22 | 14-Dec-22 | - Days | SOCKET WELD FLANGE, |
| 60 | B378-999-XT-MR-0215 | 3 | 21-Nov-22 | 23-Nov-22 | - Days | HV CABLES 6.6 KV (U) |
| 61 | B378-111-EA-MR-6033 | 1 | 21-Nov-22 | 06-Dec-22 | - Days | VENT STEAM CONDENSER |
| 62 | B378-000-YC-MR-1450 | 37 | 21-Nov-22 | 25-Nov-22 | - Days | ON-OFF VALVE, TYPE : |
| 63 | B378-999-XD-MR-0105 | 2 | 25-Nov-22 | 08-Dec-22 | - Days | POWER TRANSFORMER, 3 |
| 64 | B378-000-YA-MR-1613 | 1 | 25-Nov-22 | 08-Dec-22 | - Days | WATER QUALITY ANALYS |
| 65 | B378-000-WB-MR-3133 | 44 | 01-Dec-22 | 07-Dec-22 | - Days | GATE VALVE, 800, SW |
| 66 | B378-131-PA-MR-5950 | 3 | 05-Dec-22 | 20-Dec-22 | - Days | CLOSED DRAIN/VENT PU |
| 67 | B378-000-YL-MR-1250 | 11 | 05-Dec-22 | 14-Dec-22 | - Days | TANK LEVEL INSTRUMEN |
| 68 | B378-000-WC-MR-3211 | 64 | 07-Dec-22 | 20-Dec-22 | - Days | SOCKET WELD FLANGE, |
| 69 | B378-000-WA-MR-3206 | 18 | 12-Dec-22 | 20-Dec-22 | - Days | SEAMLESS PIPE, B-36. |
| 70 | B378-111-PA-MR-5240 | 1 | 12-Dec-22 | 15-Dec-22 | - Days | PROPYLENE CHARGE PUM |
| 71 | B378-000-WF-MR-3240 | 66 | 12-Dec-22 | 22-Dec-22 | - Days | GASKET, SP.W SS+GRF+ |
| 72 | B378-000-WD-MR-3221 | 11 | 14-Dec-22 | 19-Dec-22 | - Days | ELBOW.90, SW, 3000, |
| 73 | B378-000-WB-MR-3138 | 65 | 14-Dec-22 | 29-Dec-22 | - Days | GATE VALVE, 2.0 INCH |
| 74 | B378-000-WC-MR-3212 | 9 | 19-Dec-22 | 03-Jan-23 | - Days | SOCKET WELD FLANGE,6 |
| 75 | B378-000-YF-MR-2045 | 18 | 19-Dec-22 | 22-Dec-22 | - Days | VORTEX FLOWMETER, 40 |
| 76 | B378-000-WD-MR-3120 | 548 | 21-Dec-22 | 10-Feb-23 | - Days | ELBOW.90,B-16.11,SW, |
| 77 | B378-000-YF-MR-1041 | 1 | 22-Dec-22 | 03-Jan-23 | - Days | AVERAGING PITOT TUBE |
| 78 | B378-111-PA-MR-5280 | 4 | 22-Dec-22 | 03-Jan-23 | - Days | T2 CHARGE PUMP |
| 79 | B378-000-WD-MR-3222 | 81 | 22-Dec-22 | 10-Jan-23 | - Days | ELBOW.90, B-16.11,SW |
| 80 | B378-000-WB-MR-3137 | 87 | 26-Dec-22 | 09-Jan-23 | - Days | GATE VALVE, B-16.5 R |
| 81 | B378-000-WB-MR-3131 | 194 | 30-Dec-22 | 15-Feb-23 | - Days | GATE VALVE, 2.0 IN, |
| 82 | B378-000-YR-MR-1560 | 14 | 30-Dec-22 | 03-Jan-22 | - Days | PILOT OPERATED SAFET |
| 83 | B378-111-PA-MR-5250 | 1 | 30-Dec-22 | 10-Jan-23 | - Days | RECOVERED PROPYLENE |
| 84 | B378-000-WD-MR-3220 | 91 | 02-Jan-23 | 09-Jan-23 | - Days | ELBOW.90, 1.0 IN, SW |
| 85 | B378-000-WA-MR-3203 | 24 | 02-Jan-23 | 01-Feb-23 | - Days | PIPE, 16.0 IN, 6.0 M |
| 86 | B378-000-YC-MR-2440 | 5 | 02-Jan-23 | 07-Feb-23 | - Days | DESUPERHEATER, BODY- |
| 87 | B378-131-LZ-MR-5930 | 2 | 05-Jan-23 | 10-Jan-23 | - Days | MERCAPTAN DOSING SYS |
| 88 | B378-000-WB-MR-3132 | 25 | 05-Jan-23 | 30-Jan-23 | - Days | GATE VALVE, 150, 16. |
| 89 | B378-000-WB-MR-3082 | 68 | 05-Jan-23 | 07-Feb-23 | - Days | GLOBE VALVE, 10.0 IN |
| 90 | B378-000-YF-MR-1841 | 8 | 09-Jan-23 | 30-Jan-23 | - Days | FLOW ELEMENT VENTURI |
| 91 | B378-000-WA-MR-3201 | 38 | 09-Jan-23 | 17-Jan-23 | - Days | SEAMLESS, PIPE, CS, |
| 92 | B378-000-WA-MR-3204 | 6 | 11-Jan-23 | 17-Jan-23 | - Days | SEAMLESS, PIPE, 0.75 |
| 93 | B378-000-WB-MR-3235 | 15 | 10-Jan-23 | 10-Feb-23 | - Days | GATE VALVE, MOTOR OP |
| 94 | B378-101-UR-MR-8860 | 28 | 11-Jan-23 | 22-May-23 | - Days | M/S CRI-MATERIAL |
| 95 | B378-111-VV-MR-6036 | 5 | 18-Jan-23 | 10-Feb-23 | - Days | PRESSURE VESSELS-SS |
| 96 | B378-111-EE-MR-6040 | 2 | 18-Jan-23 | 10-Feb-23 | - Days | HEAT EXCHANGER |
| 97 | B378-111-VV-MR-6034 | 8 | 27-Jan-23 | 23-Feb-23 | - Days | PRESSURE VESSELS-SS |
| 98 | B378-000-GN-MR-4080 | 5 | 30-Jan-23 | 28-Feb-23 | - Days | BASKET-FILTER |
| 99 | B378-000-YF-MR-1055 | 4 | 31-Jan-23 | 10-Feb-23 | - Days | ULTRASONIC FLOWMETER |
| 100 | B378-000-WA-MR-3001 | 5 | 06-Feb-23 | 10-Feb-23 | - Days | PIPES-(CS SEAMLESS & SAW) |
| 101 | B378-999-XH-MR-0430 | 10 | 06-Feb-23 | 01-Mar-23 | - Days | BATTERIES – NICKEL |
| 102 | B378-111-PA-MR-5310 | 1 | 09-Feb-23 | 23-Feb-23 | - Days | PUMP ROTORY SCREW (SCFP) |
| 103 | B378-000-YA-MR-2680 | 4 | 23-Feb-23 | 05-Jun-23 | - Days | STACK GAS ANALYSER SYSTEMS |
| 104 | B378-111-PA-MR-5260 | 6 | 23-Feb-23 | 10-Mar-23 | - Days | PUMP-CENTRIFUGAL.HORIZONTAL |
| 105 | B378-000-WB-MR-3237 | 8 | 27-Feb-23 | 10-Mar-23 | - Days | VALVES-CHECK (DUAL PLATE) |
| 106 | B378-112-LL-MR-4230 | 1 | 07-Mar-23 | 10-Mar-23 | - Days | TEAL LOADING ARM |
| 107 | B378-111-EE-MR-6039 | 5 | 07-Mar-23 | 10-Mar-23 | - Days | HEAT EXCHANGER CARBON STEEL -LTCS |
| 108 | B378-000-WB-MR-3239 | 18 | 14-Mar-23 | 24-Mar-23 | - Days | VALVES-GATE & GLOBE |
| 109 | B378-101-EE-MR-6024 | 2 | 14-Mar-23 | 30-May-23 | - Days | HEAT EXCHANGER KCS & SS |
| 110 | B378-111-VV-MR-6035 | 5 | 17-Mar-23 | 24-Mar-23 | - Days | PRESSURE VESSELS CS, LTCS & LAS |
| 111 | B378-999-XI-MR-0440 | 8 | 17-Mar-23 | 10-Apr-23 | - Days | UPS SYSTEMS |
| 112 | B378-101-PA-MR-5120 | 1 | 22-Mar-23 | 24-Mar-23 | - Days | PUMP- RECIPROCATING |
| 113 | B378-101-PA-MR-5130 | 1 | 22-Mar-23 | 24-Mar-23 | - Days | CENTRIFUGAL HORIZONTAL (SPP) |
| 114 | B378-000-WA-MR-3202 | 4 | 22-Mar-23 | 04-Apr-23 | - Days | PIPES-CS (3L PE COATED) |
| 115 | B378-131-VV-MR-6027 | 1 | 29-Mar-23 | 10-Apr-23 | - Days | PRESSURE VESSELS-SS |
| 116 | B378-000-WB-MR-3232 | 53 | 29-Mar-23 | 25-Apr-23 | - Days | VALVES-GATE, GLOBE&CHECK-CAST |
| 117 | B378-000-YL-MR-1237 | 29 | 29-Mar-23 | 19-May-23 | - Days | SPL. LEVEL INSTRUMENTS |
| 118 | B378-000-MF-MR-8020 | 1 | 29-Mar-23 | 25-Apr-23 | - Days | WATER CUM FOAM MONITOR |
| 119 | B378-000-YL-MR-1221 | 33 | 04-Apr-23 | 19-May-23 | - Days | MAGNETIC LEVEL GAUGE |
| 120 | B378-111-EE-MR-6041 | 1 | 06-Apr-23 | 19-Apr-23 | - Days | HEAT EXCHANGERS LAS |
| 121 | B378-101-LW-MR-7410 | 1 | 07-Apr-23 | 19-Apr-23 | - Days | WASTE HEAT BOILER PACKAGE |
| 122 | B378-111-EE-MR-6042 | 1 | 11-Apr-23 | 13-Apr-23 | - Days | HEAT EXCHANGER CARBON STEEL |
| 123 | B378-101-LZ-MR-7441 | 1 | 12-Apr-23 | 25-Apr-23 | - Days | STEAM GENERATOR PACKAGE |
| 124 | B378-130-PA-MR-5830 | 5 | 25-Apr-23 | 19-May-23 | - Days | PUMP ROTARY LOBE TYPE |
| 125 | B378-000-YA-MR-2565 | 4 | 25-Apr-23 | 30-May-23 | - Days | CORROSION MONITORING SYSTEM |
| 126 | B378-000-WA-MR-3103 | 72 | 25-Apr-23 | 15-May-23 | - Days | PIPES-(SMLS AND WELDED) |
| 127 | B378-000-GN-MR-4070 | 5 | 28-Apr-23 | 19-May-23 | - Days | CARTRIDGE FILTER |
| 128 | B378-000-WB-MR-3230 | 23 | 28-Apr-23 | 15-May-23 | - Days | VALVES-GATE, GLOBE & CHECK |
| 129 | B378-000-WB-MR-3238 | 41 | 02-May-23 | 15-May-23 | - Days | VALVES-GATE, GLOBE & CHECK |
| 130 | B378-000-YF-MR-1050 | 1 | 02-May-23 | 15-May-23 | - Days | MAGNETIC FLOWMETER |
| 131 | B378-111-PA-MR-5290 | 4 | 08-May-23 | 19-May-23 | - Days | PUMP- AIR OPERATED DIAPHRAGM |
| 132 | B378-000-YS-MR-1780 | 2 | 08-May-23 | 15-May-23 | - Days | FIELDBUS SIGNAL CABLES |
| 133 | B378-112-LZ-MR-4180 | 1 | 09-May-23 | 15-May-23 | - Days | ADDITIVE UNLOADING PACKAGE |
| 134 | B378-112-GK-MR-4260 | 2 | 17-May-23 | 26-May-23 | - Days | BAG FILTER PACKAGE |
| 135 | B378-101-PA-MR-5960 | 1 | 23-May-23 | 26-May-23 | - Days | PUMP-CENTRIFUGAL |
| 136 | B378-101-PA-MR-5140 | 1 | 25-May-23 | 30-May-23 | - Days | PUMP- CENTRIFUGAL HORIZONTAL |
| 137 | B378-131-PA-MR-5990 | 1 | 28-May-23 | 30-May-23 | - Days | PUMP -CENTRIFUGAL.VERTICAL |
| 138 | B378-000-WB-MR-3236 | 74 | 28-May-23 | 30-May-23 | - Days | VALVES-BALL |
| 139 | B378-999-XB-MR-0010 | 14 | 30-May-23 | 28-Jun-23 | - Days | SWITCH BOARDS |
| 140 | B378-112-LZ-MR-4090 | 1 | 30-May-23 | 28-Jun-23 | - Days | FREIGHT CUM PASSENGER ELEVATOR |
| 141 | B378-112-GF-MR-4250 | 1 | 04-Jun-23 | 28-Jun-23 | - Days | PRODUCT PURGE BIN ROTARY FEEDER |
| 142 | B378-000-WD-MR-3052 | 144 | 02-Jun-23 | 00-Jan-00 | 34 - Days | FITTINGS |
| 143 | B378-000-HH-MR-4350 | 12 | 08-Jun-23 | 28-Jun-23 | - Days | CRANE- E.O.T |
| 144 | B378-131-LZ-MR-5935 | 1 | 07-Jun-23 | 07-Jun-23 | - Days | DOSING PACKAGE(SKID MOUNTED) |
| 145 | B378-111-PA-MR-5980 | 1 | 07-Jun-23 | 28-Jun-23 | - Days | PUMP-CENTRIFUGAL, HORIZONTAL |
| 146 | B378-111-EX-MR-6044 | 1 | 08-Jun-23 | 00-Jan-00 | 28 - Days | TEMPERED WATER COOLER |
| 147 | B378-111-VV-MR-6047 | 3 | 11-Jun-23 | 28-Jun-23 | - Days | PRESSURE VESSEL - LTCS |
| 148 | B378-000-WC-MR-3210 | 75 | 11-Jun-23 | 00-Jan-00 | 25 - Days | FLANGES-CS |
| 149 | B378-000-YT-MR-1416 | 3 | 13-Jun-23 | 28-Jun-23 | - Days | SPECIAL TEMPERATURE ELEMENTS |
| 150 | B378-101-JA-MR-6821 | 1 | 14-Jun-23 | 28-Jun-23 | - Days | REACTOR EVACUATION EJECTOR |
| 151 | B378-130-PA-MR-5970 | 1 | 14-Jun-23 | 28-Jun-23 | - Days | PUMP-ROTARY LOBE |
| 152 | B378-000-WF-MR-3083 | 169 | 17-Jun-23 | 00-Jan-00 | 19 - Days | FITTINGS |
| 153 | B378-000-YC-MR-1331 | 35 | 17-Jun-23 | 28-Jun-23 | - Days | CONTROL VALVE |
| 154 | B378-000-YF-MR-2060 | 31 | 25-Jun-23 | 00-Jan-00 | 11 - Days | MASS FLOWMETERS-CORIOLIS |
| 155 | B378-000-YL-MR-2236 | 5 | 25-Jun-23 | 00-Jan-00 | 11 - Days | SPECIAL LEVEL INSTRUMENTS |
| 156 | B378-111-EX-MR-6045 | 2 | 01-Jul-23 | 00-Jan-00 | 5 - Days | ELECTRIC HEATER |
| 157 | B378-111-VV-MR-6046 | 4 | 05-Jul-23 | 00-Jan-00 | 1 - Days | PRESSURE VESSEL-CS,SS & LAS |
| TOTAL: | Total Number of Items (Sent to Gail) : 4854 Recived : 4423 ,Pending : 431 As on Dated : 06-07-2023 | |||||
FOA-PO DETAILS